Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2010 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT4052 |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Power Supplies |
5GND/-5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Current-Max (Isup) |
0.16mA |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
-3db Bandwidth |
180MHz |
On-State Resistance (Max) |
150Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
2μA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
60ns, 48ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
57ns |
Length |
19.05mm |
RoHS Status |
ROHS3 Compliant |
74HCT4052N,112 Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with 74HCT4052 if you are looking for variants. In this analog multiplexer, the value is Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
74HCT4052N,112 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 180MHz
74HCT4052N,112 Applications
There are a lot of NXP USA Inc. 74HCT4052N,112 Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Data Acquisition Systems
- Remote wireless modules
- ISDN NT1/TA
- Battery-powered systems
- E1 Multiplexer
- Avionics and Military Systems
- DSLAMs
- Cell phones
- Frame Relay Equipment