74HCT4053BQ-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140Ohm |
| Base Part Number | 74HCT4053 |
| Pin Count | 16 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 16μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 34ns, 31ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4053BQ-Q100,1 Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~125°C TA. A total of 16 pins are injected into the electrical part body. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Try searching for 74HCT4053 variants of the analog switch ic. As far as internal resistance is concerned, it has 140Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The analogue multiplexer could operate on 16μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached.
74HCT4053BQ-Q100,1 Features
Switch Circuit: SPDT
16μA Supply Current
-3db Bandwidth: 170MHz
74HCT4053BQ-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4053BQ-Q100,1 Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Residential Gateways, Home Gateway/Router
- PBX interfaces
- Channel Banks
- Industrial and process control systems
- Cable PC
- Avionics
- Access Concentrators
- E1 Network Equipment
- Signal routing between systems
