74HCT4053D-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 74HCT4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 34ns, 31ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 72ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4053D-Q100,11 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. A 2 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 3 circuits. Use 74HCT4053 to search for variants of the digital switches. As far as internal resistance is concerned, it has 140Ohm. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. This multiplexer would work with 16μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 5VA dual power supply should have at least 1V voltage attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. There is a voltage range of 5V operating voltages for the electrical part. There are 6 inputs to be operated. It comes from the Automotive, AEC-Q100 series.
74HCT4053D-Q100,11 Features
2 Channels
Switch Circuit: SPDT
16μA Supply Current
-3db Bandwidth: 170MHz
74HCT4053D-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT4053D-Q100,11 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Avionics
- Remote wireless modules
- Mechanical reed relay replacement
- Multi-Line E1 Interface Cards
- Central office
- Precision data acquisition
- PBXs
- Sample-and-hold systems
- Modems
