Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
140Ohm |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT4053 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
16μA |
Power Dissipation |
500mW |
Propagation Delay |
5 ns |
Turn On Delay Time |
48 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
170MHz |
Turn-Off Delay Time |
44 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
120Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
2.5V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
9Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
34ns, 31ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Drain to Source Resistance |
140Ohm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HCT4053D,118 Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -40°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. Unlike digital switches, these are based on SPDT switching circuits. There are 3 circuits in this multiplexer. Try searching for 74HCT4053 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 140Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. It would be sufficient to run this analogue multiplexer with 16μA current. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. This electrical part is compatible with 5V operating voltages. Among the inputs that can be operated are the 6 inputs. A 170MHz-bandwidth can be used for data transfer. Drain to Source resistance is 140Ohm.
74HCT4053D,118 Features
1 Channels
Switch Circuit: SPDT
16μA Supply Current
Bandwidth: 170MHz
Drain-to-Source resistance: 140Ohm
74HCT4053D,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4053D,118 Analog Switches & Multiplexers ICs applications.
- Imaging
- Access Concentrators
- Digital cross connects (DSX-1)
- USB 1.1 signal switching circuits
- Cable PC
- SDH/SONET multiplexers
- Voice over IP/DSL – Integrated Access Devices, Smart
- Central office
- Communication systems
- Audio signal routing