74HCT4053DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 48 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 44 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 2.5V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 34ns, 31ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4053DB,112 Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 6 channels. With a 4.5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. A SPDT switching circuit is used for these analog switches. 3 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with 74HCT4053 if you are looking for variants. This digital multiplexer has 140Ohm internal resistance. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 4.5V. This digital switch can be operated with a current of 16μA. There is no problem with using dual supply voltage, but it should not exceed 5V. When using dual power supplies, you should attach at least 1V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. The electrical part can be operated at 5V voltage levels. 170MHz-bandwidths can be used to transfer data between multiplexers.
74HCT4053DB,112 Features
6 Channels
Switch Circuit: SPDT
16μA Supply Current
Bandwidth: 170MHz
74HCT4053DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4053DB,112 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Sample-and-hold systems
- Private Branch Exchange (PBX)
- CSU
- Microprocessor controlled systems
- Digital access cross connects
- Channel Banks
- Data switching
- DSLAMs
- Transmit
