74HCT4053DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 48 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 44 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 34ns, 31ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4053DB,118 Overview
The electrical component comes in 16-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SPDT switching circuits. There are 3 circuits in this switch device. Using the 74HCT4053 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 140Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 4.5V. It would be sufficient to run this analogue multiplexer with 16μA current. There is no problem with using dual supply voltage, but it should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. The electrical part can be operated at 5V voltage levels. There are 6 inputs to be operated. 170MHz-bandwidths can be used to transfer data between multiplexers.
74HCT4053DB,118 Features
1 Channels
Switch Circuit: SPDT
16μA Supply Current
Bandwidth: 170MHz
74HCT4053DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4053DB,118 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- PDH Multiplexers
- Sample-and-hold systems
- Industrial and process control systems
- Power routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- DSLAMs
- SONET
- Communication systems
- Avionics
