74HCT4053PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 48 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 44 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 34ns, 31ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4053PW,112 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. SPDT switching circuits are used in these analog switch ics. The multiplexer consists of 3 circuits. Try searching for the analog switch ic with 74HCT4053 if you are looking for variants. It has an internal resistance of 140Ohm. For details about the functions of 16 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. An effective Dual, Single supply digital multiplexer. 4.5V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 16μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. Operating voltages of 5V are compatible with the electrical part. The electrical component supports 6 inputs. There are 170MHz bandwidths for data transfer.
74HCT4053PW,112 Features
1 Channels
Switch Circuit: SPDT
16μA Supply Current
Bandwidth: 170MHz
74HCT4053PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4053PW,112 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- SDH
- Power routing
- Automotive applications
- Medical
- HDTV
- Digital access cross connects
- Isolation
- Precision test equipment
- Cell phones
