74HCT4053PW,118

34ns, 31ns SPDT 120Ohm Analog Switches 74HCT4053 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT4053PW,118
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 526
Description: 34ns, 31ns SPDT 120Ohm Analog Switches 74HCT4053 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	170MHz
Turn-Off Delay Time	44 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	120Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	2.5V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	34ns, 31ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Drain to Source Resistance	180Ohm
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	180Ohm
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4053
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	16μA
Power Dissipation	500mW
Propagation Delay	5 ns
Turn On Delay Time	48 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux

74HCT4053PW,118 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. There are 16 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. The multiplexer consists of 3 circuits. Using the 74HCT4053 search parameter, you can discover variants of the switch. A 180Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. A voltage higher than 5.5V should not normally be supplied to the switches. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 4.5V. An operating current of 16μA would be sufficient for this switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. When using dual power supplies, you should attach at least 1V. The electronic component can function from 5V. In order to operate the 6 inputs, there are several steps to follow. The transfer of data can be performed over 170MHz bandwidths. It has a Drain to Source resistance of 180Ohm ohms.