74HCT4059D,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Prescaler/Multivibrators |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4059 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HCT |
| Direction | Down |
| Logic Type | Divide-by-N |
| Number of Bits per Element | 16 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 69 ns |
| fmax-Min | 40 MHz |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT4059D,112 Overview
This is a device supplied in the 24-SOIC (0.295, 7.50mm Width) package. In order to configure it, it uses 24terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device has 1terminations. 24is the number of pins on all components. Packaging is based on Tube. In this case, it appears as a member of the family [0]. Due to its membership in the 74HCTseries, it is suitable for a variety of applications. Divide-by-Nis selected as the logic type. In this case, the operating temperature should be set to -40°C~125°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. It contains 16elements. There are more related parts under the 74HCT4059base part number. From the voltage source, there is 5Vvoltage. Supply voltages can be as low as 4.5V volts (Vsup). Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts. The electronic components is from Prescaler/Multivibrators family.
74HCT4059D,112 Features
Embedded in the 24-SOIC (0.295, 7.50mm Width) package
16 bits per element
74HCT4059D,112 Applications
There are a lot of NXP USA Inc. 74HCT4059D,112 Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- LINEARIZATION
- Signal gating
- DIVISION
- Frequency dividing circuits
- Divide-by"N" counters/frequency synthesizers
- Frequency division
- Binary counter/decoder
- SQUARING
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
