74HCT4066BQ-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Base Part Number | 74HCT4066 |
| Pin Count | 14 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4066BQ-Q100,1 Overview
The electrical component comes in 14-VFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. It is part of the design of the 14 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. Search with 74HCT4066 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 35Ohm. Please refer to the datasheets for 14 pins functions. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. 4.5V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 40μA. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. This is one of the Automotive, AEC-Q100 series.
74HCT4066BQ-Q100,1 Features
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HCT4066BQ-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4066BQ-Q100,1 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Precision test equipment
- High reliability control systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Signal routing between systems
- Fiber In The Loop (FITL)
- CSU
- Medical systems
- Multi-Line E1 Interface Cards
- Cell phones
