74HCT4066BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 12 ns |
| Logic Function | Demux, Mux |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 20 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 36ns |
| Switch-off Time-Max | 53ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4066BQ,115 Overview
This electronic part is conveniently packaged in 14-VFQFN Exposed Pad, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 14. By its 1 channels, the electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 14 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. 74HCT4066 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. Please refer to the datasheets for 14 pins functions. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 4.5V. The analogue multiplexer could operate on 40μA current. The voltage required by this switch device is 4.5V~5.5V, draining from a single voltage supply. Operating voltages of 5V are compatible with the electrical part. There are 4 inputs to be operated.
74HCT4066BQ,115 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HCT4066BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT4066BQ,115 Analog Switches & Multiplexers ICs applications.
- Routers
- Digital Cross-Connects
- Precision data acquisition
- Relay Replacement
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable Modem
- Fault Tolerant Systems
- DVD-R
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Video switching
