74HCT4066D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4066 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Output Current | 4mA |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 36ns |
| Switch-off Time-Max | 53ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Drain to Source Resistance | 2Ohm |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
74HCT4066D,118 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 14. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 14 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. It consists of 4 circuits. Try searching with 74HCT4066 to find analog multiplexer variants. Datasheets for functions of 14 pins are available. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. This electronic component presents a Drain to Source resistance of 2Ohm.
74HCT4066D,118 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
Drain-to-Source resistance: 2Ohm
74HCT4066D,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4066D,118 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Microwave transmission systems
- Mechanical reed relay replacement
- PDAs
- Fiber to the Home
- Access Concentrators
- Audio/video switches
- Battery Powered Systems
- Medical systems
- Fiber In The Loop (FITL)
