74HCT4066DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HCT4066 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 12 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 20 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3Ohm |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4066DB,118 Overview
As the electronic part is packed in 14-SSOP (0.209, 5.30mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~125°C TA. A electrical component with 4 channels is capable of high-quality output. A SPST - NO switching circuit is used to build these analog multiplexers. The multiplexer consists of 4 circuits. 74HCT4066 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. The functions of 14 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 4.5V. In order to operate this switch device, it would need a current of 40μA. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. The electrical part can be operated at 5V voltage levels. The electrical component supports 4 inputs. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. The analog switch ics has 4 outputs. It is offered by suppliers in package 14-SSOP.
74HCT4066DB,118 Features
4 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HCT4066DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4066DB,118 Analog Switches & Multiplexers ICs applications.
- SDH
- CSU
- RGB switches
- MP3 players
- Mechanical reed relay replacement
- Industrial and process control systems
- Precision instrumentation
- Voice over IP/DSL – Integrated Access Devices, Smart
- Sample-and-hold systems
- Private Branch Exchange (PBX)
