74HCT4066N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 36ns |
| Switch-off Time-Max | 53ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Length | 19.025mm |
| RoHS Status | ROHS3 Compliant |
74HCT4066N,112 Overview
As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 14 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. An injection of 14 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Use 74HCT4066 to search for variants of the digital switches. The analogue multiplexer in this example is a typical Multiplexer or Switches. An analogue multiplexer drains from a single voltage supply at 4.5V~5.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
74HCT4066N,112 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HCT4066N,112 Applications
There are a lot of NXP USA Inc. 74HCT4066N,112 Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Digital cross connects (DSX-1)
- Fiber to the Home
- Access Concentrators
- Cable Modem
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Power routing
- Imaging
- SONET/SDH ADM
- DVD-R
