74HCT4066N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Supplier Device Package | 14-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Circuits | 4 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3Ohm |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| RoHS Status | ROHS3 Compliant |
74HCT4066N,112 Overview
Shipping overseas is convenient due to the electrical component's packing in 14-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 4 circuits. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. It is possible to purchase a 14-DIP package from suppliers.
74HCT4066N,112 Features
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HCT4066N,112 Applications
There are a lot of Rochester Electronics, LLC 74HCT4066N,112 Analog Switches & Multiplexers ICs applications.
- RGB switches
- PBX interfaces
- Mechanical reed relay replacement
- Cell phones
- Multi-Line E1 Interface Cards
- Central office
- FTTH
- Avionics and Military Systems
- SONET/SDH ADM
- Fiber In The Loop (FITL)
