74HCT4066PW-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 100mW |
| Throw Configuration | SPST |
| Number of Inputs | 4 |
| Supply Type | Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 20Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 44ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 36ns |
| Switch-off Time-Max | 53ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4066PW-Q100,1 Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. A total of 14 terminations have been recorded. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component like this is included in the 14 series. The analog switch ics are built using SPST - NO switching circuits. 74HCT4066 can be used to search for analog multiplexer variants. Analog switches have 35Ohm internal resistance. Datasheets for functions of 14 pins are available. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analog switch ics with Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. For this multiplexer to operate, 40μA current would be sufficient. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. A voltage of 5V can be used to operate the electronic component. The 4 inputs need to be operated in order to work. The series starts with Automotive, AEC-Q100.
74HCT4066PW-Q100,1 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HCT4066PW-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4066PW-Q100,1 Analog Switches & Multiplexers ICs applications.
- CSU
- Medical Instrumentation
- Private Branch Exchange (PBX)
- Data switching
- Communication systems
- Video signal routing
- Audio and video routing
- Isolation
- Digital Cross-Connects
- Battery-powered systems
