74HCT4067BQ,115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Power Supplies | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.294mA |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 83ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4067BQ,115 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-VFQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 16:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. 24 terminations have been made so far. This electronic part offers high-quality output due to its 16 channels. A 4.5V voltage supply should turn on and run the electronic component. A total of 24 pins are injected into the electrical part body. There are 1 circuits in this switch device. Try searching for the analog switch ic with 74HCT4067 if you are looking for variants. An switch multiplexer with 120Ohm internal resistance has a value of 120Ohm. To find out what the 24 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. 4.5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 8μA current. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V.
74HCT4067BQ,115 Features
16 Channels
8μA Supply Current
-3db Bandwidth: 100MHz
74HCT4067BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT4067BQ,115 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Mechanical reed relay replacement
- Sample-and-hold systems
- Communication systems
- Automotive applications
- Video signal routing
- Remote wireless modules
- ISDN NT1/TA
- Audio and video routing
- Avionics test equipment
