74HCT4067D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 98ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4067D,112 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. Totally, there are 24 terminations. This electronic part offers high-quality output due to its 16 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. The electrical component body receives 24 pins. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HCT4067. The internal resistance of this digital multiplexer is 120Ohm. You can find the functions of the 24 pins in the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. A low voltage of 4.5V should be applied to the electronic component. An operating current of 8μA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V. 5V operating voltages are supported by the electronic component. It is possible to transfer data over a 100MHz-bandwidth.
74HCT4067D,112 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4067D,112 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Frame Relay Equipment
- New designs requiring multiplexer functions
- Cable PC
- Cable Modem
- Digital access cross connects
- Sample hold systems
- Audio and video signal routing
- Channelized and Unchannelized DS3 applications
- High reliability control systems
