74HCT4067D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Supply Current-Max (Isup) | 50mA |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 450ns |
| Switch-off Time-Max | 435ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4067D,118 Overview
Shipping overseas is convenient with the electronic component packed in 24-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 16:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 24 terminations. As a result of its 16 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 24 series that this electronic component is included. There are 1 circuits in this multiplexer. 74HCT4067 can be used to search for analog multiplexer variants. There is 120Ohm internal resistance in this digital multiplexer. You can find the functions of the 24 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. 4.5V should be the lowest voltage fed to the electronic component. For this digital switch to work, 8μA current would suffice. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. Operating voltages range from 5V. In order to operate the 16 inputs, there are several steps to follow. It is possible to transfer data over a 100MHz-bandwidth.
74HCT4067D,118 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067D,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4067D,118 Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Public switching systems
- Communication systems
- Automotive applications
- Channel Banks
- Transmit
- New designs requiring multiplexer functions
- SONET/SDH ADM
- E1 Network Equipment
- Microwave transmission systems
