74HCT4067DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 98ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4067DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 24-SSOP (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 16:1. Increasing operating temperature to around -40°C~125°C TA. In total, there are 24 terminations. A electrical component with 16 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 24 series is equipped with this electronic component. A 1 circuit is present in this switch device. Try searching for the analog switch ic with 74HCT4067 if you are looking for variants. Internally, this switch multiplexer has a resistance of 120Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 5.5V in normal situations. A cost-effective Single supply type analogue multiplexer. 4.5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 8μA current. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. Operating voltages range from 5V. There are various bandwidths available for data transfer.
74HCT4067DB,112 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4067DB,112 Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Cell phones
- Remote wireless modules
- Microprocessor Controlled Analog Systems
- CSU
- Automotive applications
- USB 1.1 signal switching circuits
- Fiber to the Home
- Multiplexers
- Cross Connects
