74HCT4067DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 83ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4067DB,118 Overview
As the electronic part is packed in 24-SSOP (0.209, 5.30mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 24. A 16 channel electronic part produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 24 pins. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HCT4067. As far as internal resistance is concerned, it has 120Ohm. For functions related to 24 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. 8μA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. Operating voltages range from 5V. The data can be transferred over a wide range of bandwidths, called 100MHz bandwidths.
74HCT4067DB,118 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4067DB,118 Analog Switches & Multiplexers ICs applications.
- Avionics
- Cell phones
- Video switching
- Power routing
- Video signal routing
- Fault Tolerant Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Voice over IP/DSL – Integrated Access Devices, Smart
- Sample-and-hold systems
- Transmit
