74HCT4067PW,112
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 98ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
74HCT4067PW,112 Overview
Presented in 24-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 16:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~125°C TA. 24 terminations have been made so far. The electronic part delivers high-quality output through its 16 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 24 pins are injected into the body of the electronic part. It consists of 1 circuits. Try searching with 74HCT4067 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 120Ohm. The functions of 24 pins can be found in the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. 4.5V is the lowest voltage the electrical component should receive. This multiplexer would work with 8μA current. The voltage required by this switch device is 4.5V~5.5V, draining from a single voltage supply. This electrical part is compatible with 5V operating voltages. Operating the 16 inputs requires 16 inputs. It is possible to transfer data over a 100MHz-bandwidth.
74HCT4067PW,112 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4067PW,112 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Wireless Local Loop
- High speed data transmission line cards
- Industrial control systems
- Avionics test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- High-Voltage
- Video switching
- Digital Cross-Connects
