74HCT4067PW,118
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 211.997734mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Power Dissipation | 500mW |
| Max Supply Current | 8μA |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 60 ns |
| On-State Resistance (Max) | 120Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 83ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height | 950μm |
| Length | 7.9mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
74HCT4067PW,118 Overview
As the electronic part is packed in 24-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 16:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 24 terminations. High-quality output is provided by the electronic component's 16 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There is an electrical component included in the 24 series. The circuits in this analogue multiplexer number 1. Use 74HCT4067 to search for variants of the digital switches. This digital multiplexer has 120Ohm internal resistance. The datasheets for the 24 pins explain the functions. Multiplexers should not be powered above 5.5V in normal situations. A cost-effective Single supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. The analogue multiplexer could operate on 8μA current. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 8μA. A voltage of 5V can be used to operate the electronic component. There are 100MHz bandwidths for data transfer.
74HCT4067PW,118 Features
16 Channels
8μA Supply Current
Bandwidth: 100MHz
74HCT4067PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4067PW,118 Analog Switches & Multiplexers ICs applications.
- DSUs
- Avionics
- Multiplexers
- Relay replacements
- Battery Powered Instruments
- New designs requiring multiplexer functions
- Digital access cross connects
- Automatic test equipment
- Audio and video signal routing
- Precision data acquisition
