74HCT42N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT42 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 4:10 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | INVERTED |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Propagation Delay (tpd) | 53 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT42N,652 Overview
Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.Tube is the method used for packaging.Through Hole is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Decoder is used.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.With the 74HCT series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 16 terminations are desgined.In addition, it also has a base part number of 74HCT42, which can be used to find related parts.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.In the HCT family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.mux switch's normal operation requires the power supply of 5V.
74HCT42N,652 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
74HCT42N,652 Applications
There are a lot of NXP USA Inc. 74HCT42N,652 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Telephone network
- Analog, digital or video signal switching
- Used to connect a single source to multiple destinations
- Solenoid cooling fan
- Encrypted communications system
- Memory system of computers
- Audio transmission
- High-performance memory-decoding applications
- Combinational circuit
