74HCT4316D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 320Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4316 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1nA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 56 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 42ns, 34ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74HCT4316D,112 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for the analog switch ic with 74HCT4316 if you are looking for variants. A 320Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 4.5V. For this multiplexer to operate, 1nA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIt is recommended that you attach at least 1V to your dual power supply. 5V operating voltages are supported by the electronic component. Operating the 4 inputs requires 4 inputs.
74HCT4316D,112 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HCT4316D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4316D,112 Analog Switches & Multiplexers ICs applications.
- Communications systems
- Medical Instrumentation
- Digital access cross connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Channelized and Unchannelized DS3 applications
- DVD-R
- Battery Powered Instruments
- Industrial and process control systems
- Microwave transmission systems
- Multi-Line E1 Interface Cards
