74HCT4316DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4316 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1nA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 56 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 42ns, 34ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4316DB,118 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. A 1 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for 74HCT4316 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 240Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. This multiplexer would work with 1nA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. It is recommended that you attach at least 1V to your dual power supply. The 4 inputs need to be operated in order to work.
74HCT4316DB,118 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HCT4316DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4316DB,118 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Relay Replacement
- Communications systems
- MP3 players
- Precision test equipment
- Channelized and Unchannelized DS3 applications
- Medical systems
- Access Concentrators
- Power routing
- PBXs
