74HCT4316N,112
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4316 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 42ns, 34ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Normal Position | NO |
| Length | 21.6mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
74HCT4316N,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. In Through Hole, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to -40°C~125°C TA. In total, there are 16 terminations. A 1 channel electronic part produces high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HCT4316. In this analog multiplexer, the value is Multiplexer or Switches. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
74HCT4316N,112 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 160MHz
74HCT4316N,112 Applications
There are a lot of NXP USA Inc. 74HCT4316N,112 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Fiber In The Loop (FITL)
- Fault Tolerant Systems
- Fiber to the Home
- PDAs
- DVD-R
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Industrial
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH
