Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
240Ohm |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT4316 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
1nA |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Turn On Delay Time |
56 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
50 ns |
Max Dual Supply Voltage |
5V |
-3db Bandwidth |
160MHz |
On-State Resistance (Max) |
135Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
2.5V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
16Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
42ns, 34ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74HCT4316PW,118 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SPST - NO switching circuit is used for these analog switches. Search with 74HCT4316 if you are looking for analog multiplexer variants. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. Datasheets for 16 pin functions are available upon request. Users shouldn't supply more than 5.5V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 4.5V should be applied to the electronic component. This digital switch can be operated with a current of 1nA. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. The voltage should be at least 1V if you are using dual power supplies. The electronic component can function from 5V. Operating 4 inputs is required.
74HCT4316PW,118 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HCT4316PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4316PW,118 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Communication systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Video signal routing
- Automotive applications
- PCMCIA cards
- Private Branch Exchange (PBX)
- T1/E1 Terminals
- CSU
- Automatic test equipment