74HCT4351D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 75 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 65 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 35ns, 23ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4351D,112 Overview
Shipping overseas is convenient due to the electrical component's packing in 20-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 20 terminations. A high-quality output is provided by the electrical component's 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. A total of 20 pins are injected into the body of the electronic part. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HCT4351. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. For details about the functions of 20 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 4.5V. The analogue multiplexer could operate on 400nA current. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A voltage of 5V can be used to operate the electronic component. The data can be transferred over a wide range of bandwidths, called 170MHz bandwidths.
74HCT4351D,112 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HCT4351D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4351D,112 Analog Switches & Multiplexers ICs applications.
- Industrial
- Switching Systems
- Low-Voltage
- Mechanical reed relay replacement
- Precision instrumentation
- ISDN NT1/TA
- Battery Powered Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Video switching
- ATM
