74HCT4351D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 75 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 65 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 35ns, 23ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4351D,118 Overview
This electronic part is conveniently packaged in 20-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. Totally, there are 20 terminations. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 20 series. The circuits in this analogue multiplexer number 1. Using the 74HCT4351 search parameter, you can discover variants of the switch. This digital multiplexer has 160Ohm internal resistance. To find out what the functions of 20 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 5.5V. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 4.5V. This multiplexer would work with 400nA current. Despite this switch's dual supply capability, its voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating voltages of 5V are compatible with the electrical part. 170MHz bandwidths enable data to be transferred.
74HCT4351D,118 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HCT4351D,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4351D,118 Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Routers
- SDH/SONET multiplexers
- New designs requiring multiplexer functions
- CSU
- RGB switches
- PBXs
- Cellular phones
- ATM
- Imaging
