74HCT4351DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 75 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 65 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 35ns, 23ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4351DB,118 Overview
Packed in 20-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 20 terminations. A high-quality output is provided by the electrical component's 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 20 pins. A 1 circuit is present in this switch device. Try searching for 74HCT4351 variants of the analog switch ic. The internal resistance of this digital multiplexer is 160Ohm. You can find the functions of the 20 pins in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V is the lowest voltage the electrical component should receive. An operating current of 400nA would be sufficient for this switch device. Despite this switch's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 5V. It is possible to transfer data over a 170MHz-bandwidth.
74HCT4351DB,118 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HCT4351DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4351DB,118 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Battery-powered systems
- Automotive applications
- Public switching systems
- Digital Cross-Connects
- PDAs
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fiber to the Home
- Relay replacements
- Channel Banks
