74HCT4351N,112

35ns, 23ns 120Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HCT4351 20 Pins 100nA 4.5V 20-DIP (0.300, 7.62mm)

Manufacturer: NXP USA Inc.
Nocochips NO: 568-74HCT4351N,112
Package: 20-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 800
Description: 35ns, 23ns 120Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HCT4351 20 Pins 100nA 4.5V 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Package / Case	20-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4351
Pin Count	20
JESD-30 Code	R-PDIP-T20
Qualification Status	Not Qualified
Power Supplies	5V
Number of Channels	8
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
-3db Bandwidth	170MHz
On-State Resistance (Max)	120Ohm
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Time (Ton, Toff) (Max)	35ns, 23ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	65ns
Signal Current-Max	0.025A
Height Seated (Max)	4.2mm
Length	26.73mm
RoHS Status	ROHS3 Compliant
Mounting Type	Through Hole

74HCT4351N,112 Overview

Presented in 20-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. A total of 20 terminations have been recorded. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. It is part of the design of the 20 series that this electronic component is included. It consists of 1 circuits. Try searching for 74HCT4351 variants of the analog switch ic. The analog multiplexer shown here is a typical Multiplexer or Switches. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.