74HCT4514DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | ADDRESS LATCHES |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4514 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 4:16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 83 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | LATCHED |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
74HCT4514DB,118 Overview
In order to save board space, digital switch is located in the 24-SSOP (0.209, 5.30mm Width).Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sWith the 74HCT series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 24 terminations.As its base part number is 74HCT4514, logic switch can also be used to find its related parts.For multiplexer's system, 5V voltage is supplied.Signal switch has 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The logic switch is a member of the HCT family.Vsup should be kept at 4.5V to prevent some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In addition, ADDRESS LATCHES exhibits improved characteristics.
74HCT4514DB,118 Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
ADDRESS LATCHES
74HCT4514DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4514DB,118 Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Home automation system
- Electronic circuits
- Decimal decoder
- Idle motor
- Telephone network
- Analog, digital or video signal switching
- Code conversion
- Paper plants
- Automation system
