banner_page

74HCT4515D,652

24 Terminations4.5V~5.5V 74HCT4515 Signal switch74HCT Series 1 Functions


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-74HCT4515D,652
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 298
  • Description: 24 Terminations4.5V~5.5V 74HCT4515 Signal switch74HCT Series 1 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -40°C~125°C
Packaging Tube
Published 1997
Series 74HCT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type Decoder/Demultiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature ADDRESS LATCHES
Subcategory Decoder/Drivers
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74HCT4515
Pin Count 24
JESD-30 Code R-PDSO-G24
Qualification Status Not Qualified
Circuit 1 x 4:16
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Family HCT
Current - Output High, Low 4mA 4mA
Output Polarity INVERTED
Max I(ol) 0.004 A
Prop. Delay@Nom-Sup 83 ns
Propagation Delay (tpd) 83 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Input Conditioning LATCHED
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status ROHS3 Compliant

74HCT4515D,652 Overview


Due to the lack of space on the board, digital switch is provided in the 24-SOIC (0.295, 7.50mm Width).It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers of the 74HCT series can be used in a wide range of applications.The basic configuration includes 24 terminations.The base part number is 74HCT4515, so you can find its logic switch related parts using that number.For multiplexer's system, 5V voltage is supplied.A component pin count of 24 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Among the family of HCT the logic switch is a member.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as Decoder/Drivers.It also provides improved characteristics of ADDRESS LATCHES.

74HCT4515D,652 Features


Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Power supplies of 5V
ADDRESS LATCHES

74HCT4515D,652 Applications


There are a lot of NXP USA Inc. 74HCT4515D,652 Signal Switches / Multiplexers / Decoders applications.

  • Paper plants
  • Logic gates for other digital devices
  • Data demultiplexing
  • Microprocessor input/output systems
  • Electronically controlled engine system
  • Data transfer
  • Idle motor
  • Speed synchronization of multiple motors in industries
  • Transmission from the computer system of a satellite
  • Encrypted communications system

Write a review

Note: HTML is not translated!
    Bad           Good