74HCT4851D-Q100,11
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Base Part Number | 74HCT4851 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
74HCT4851D-Q100,11 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~125°C TA are extended for operation. Into the electrical component body are injected 16 pins. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HCT4851. Analog switches have 210Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 2μA current. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. Operating voltages of 5V are compatible with the electrical part. Operating the 8 inputs requires 8 inputs. The series starts with Automotive, AEC-Q100.
74HCT4851D-Q100,11 Features
2μA Supply Current
74HCT4851D-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT4851D-Q100,11 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Avionics test equipment
- Signal routing between systems
- HDTV
- Precision instrumentation
- Remote wireless modules
- ATM
- Video signal routing
- SDH/SONET multiplexers
- Microprocessor Controlled Analog Systems
