Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
210Ohm |
Max Power Dissipation |
500mW |
Base Part Number |
74HCT4851 |
Pin Count |
16 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Power Dissipation |
500mW |
Propagation Delay |
32 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
On-State Resistance (Max) |
210Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Number of Input Lines |
8 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
Switch Time (Ton, Toff) (Max) |
25ns, 80ns |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Voltage - Supply, Single (V+) |
4.5V~5.5V |
Drain to Source Resistance |
210Ohm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
74HCT4851PW-Q100,1 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with 74HCT4851 to find analog multiplexer variants. Analog switches have 210Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 2μA current. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply. There is 210Ohm resistance between Drain and Source for this electronic part. It belongs to the series Automotive, AEC-Q100.
74HCT4851PW-Q100,1 Features
2μA Supply Current
Drain-to-Source resistance: 210Ohm
74HCT4851PW-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4851PW-Q100,1 Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Sample-and-hold systems
- Cell phones
- Audio and video signal routing
- Private Branch Exchange (PBX)
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- SDH
- Avionics and Military Systems
- Data switching