74HCT4851PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT4851 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4851PW,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 16. By its 8 channels, the electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. There are 1 circuits in this multiplexer. Use 74HCT4851 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 210Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The analogue multiplexer could operate on 2μA current. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts.
74HCT4851PW,112 Features
8 Channels
2μA Supply Current
74HCT4851PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4851PW,112 Analog Switches & Multiplexers ICs applications.
- Data switching
- Audio and video switching
- High-Voltage
- PDAs
- T1/E1 Terminals
- SONET
- Fiber to the Home
- PBX interfaces
- Precision instrumentation
- RGB switches
