74HCT4851PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT4851 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 32 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Number of Input Lines | 13 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4851PW,118 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. The electrical component body receives 16 pins. There are 1 circuits in this switch device. Try searching with 74HCT4851 to find analog multiplexer variants. Analog switches have 210Ohm internal resistance. Datasheets for 16 pin functions are available upon request. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. This digital switch can be operated with a current of 2μA. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. This electrical part is compatible with 5V operating voltages. The 8 inputs need to be operated in order to work.
74HCT4851PW,118 Features
8 Channels
2μA Supply Current
74HCT4851PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4851PW,118 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Avionics test equipment
- Isolation
- SDH/SONET multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Channelized and Unchannelized DS3 applications
- Intelligent PBX
- Cellular phones
- Precision data acquisition
- PBX interfaces
