74HCT4852BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HCT4852 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4852BQ,115 Overview
Due to its 16-VFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 4:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching with 74HCT4852 if you're looking for variants. It has an internal resistance of 210Ohm. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. It is recommended to use 4.5V as the lowest voltage for the electrical part. An operating current of 2μA would be sufficient for this switch device. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. The electrical part can be operated at 5V voltage levels. In order to operate the 8 inputs, there are several steps to follow.
74HCT4852BQ,115 Features
4 Channels
Switch Circuit: SP4T
2μA Supply Current
74HCT4852BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT4852BQ,115 Analog Switches & Multiplexers ICs applications.
- ATM
- Battery Powered Systems
- High-Voltage
- Cellular phones
- 65 V DACs
- Mechanical reed relay replacement
- Digital Cross-Connects
- Remote wireless modules
- Digital access cross connects
- Residential Gateways, Home Gateway/Router
