74HCT4852D-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Base Part Number | 74HCT4852 |
| Pin Count | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4852D-Q100,11 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~125°C TA is the extended operating temperature. There are 16 pins injected into the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. It consists of 2 circuits. Try searching for 74HCT4852 variants of the analog switch ic. Analog switches have 210Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analog switch ics with Single supply type are cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. This multiplexer would work with 2μA current. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. This is electronic component of the Automotive, AEC-Q100 series.
74HCT4852D-Q100,11 Features
Switch Circuit: SP4T
2μA Supply Current
74HCT4852D-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT4852D-Q100,11 Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Intelligent PBX
- Precision instrumentation
- ISDN NT1/TA
- PBXs
- SDH/SONET multiplexers
- Medical Instrumentation
- Sample hold systems
- Digital access cross connects
- High speed data transmission line cards
