74HCT4852D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Base Part Number | 74HCT4852 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4852D,112 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to -40°C~125°C TA. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with 74HCT4852. This digital multiplexer has 210Ohm internal resistance. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 2μA current. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply. 5V operating voltages are supported by the electronic component. The 8 inputs need to be operated in order to work.
74HCT4852D,112 Features
Switch Circuit: SP4T
2μA Supply Current
74HCT4852D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4852D,112 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Fiber In The Loop (FITL)
- Battery Powered Instruments
- Precision data acquisition
- Cable Modem
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Digital access cross connects
- High reliability control systems
- Microwave transmission systems
- Sample hold systems
