74HCT4852D,118

25ns, 80ns SP4T 210Ohm DUAL Analog Switches 74HCT4852 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT4852D,118
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 402
Description: 25ns, 80ns SP4T 210Ohm DUAL Analog Switches 74HCT4852 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	74HCT4852
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	2μA
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
On-State Resistance (Max)	210Ohm
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	25ns, 80ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Switch-on Time-Max	35ns
Switch-off Time-Max	100ns
Voltage - Supply, Single (V+)	4.5V~5.5V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2008

74HCT4852D,118 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with 74HCT4852 if you are looking for variants. Internally, this switch multiplexer has a resistance of 210Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 2μA current would be sufficient. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.