74HCT4852PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Base Part Number | 74HCT4852 |
| Pin Count | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT4852PW,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 4:1. Around -40°C~125°C TA is the extended operating temperature. Into the electrical component body are injected 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. It consists of 2 circuits. Using the 74HCT4852 search parameter, you can discover variants of the switch. There is 210Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 4.5V. It would be sufficient to run this analogue multiplexer with 2μA current. An analogue multiplexer drains from a single voltage supply at 4.5V~5.5V.
74HCT4852PW,112 Features
Switch Circuit: SP4T
2μA Supply Current
74HCT4852PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4852PW,112 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- SDH/SONET multiplexers
- CSU
- Cable PC
- Industrial and process control systems
- Battery Powered Instruments
- Sample-and-hold systems
- DSLAMs
- Communications systems
- MP3 players
