74HCT534N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 6mA 6mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT534N,652 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. T flip flop is configured with an output of Tri-State, Inverted. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HCT series. It should not exceed 40MHzin its output frequency. D latch consists of 1 elements. There is 8μA quiescent consumption. Its input capacitance is 3.5pFfarads.
74HCT534N,652 Features
Tube package
74HCT series
74HCT534N,652 Applications
There are a lot of Rochester Electronics, LLC 74HCT534N,652 Flip Flops applications.
- Common Clocks
- Shift registers
- Load Control
- Divide a clock signal by 2 or 4
- Asynchronous counter
- CMOS Process
- Dynamic threshold performance
- ESCC
- Single Down Count-Control Line
- Single Up Count-Control Line
