74HCT563D,653
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT563 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | INVERTED |
| Independent Circuits | 1 |
| Delay Time - Propagation | 18ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT563D,653 Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~125°C. The 74HCT series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. This device is designed with 20 terminations. As a member of the 74HCT563 family, it falls under that category. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. HCT is the family name of this electronic device. This device has 2 ports that can be connected to it. It reaches a maximum supply voltage (Vsup) of 5.5V. The supply voltage (Vsup) should be greater than 4.5V. Additionally, it is characterized by BROADSIDE VERSION OF 533.
74HCT563D,653 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT563 family
20 pin count
74HCT563D,653 Applications
There are a lot of NXP USA Inc. 74HCT563D,653 Latches applications.
- Counter control
- Shift left register
- Double bus register system
- Synchronous frequency dividers
- Parallel Input
- Accumulator Registers
- Meter applications
- Up/down difference counting
- Decade counting 7-segment decimal display
- Hammer Device Information
