74HCT563N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT563 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | INVERTED |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Independent Circuits | 1 |
| Delay Time - Propagation | 18ns |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT563N,652 Overview
It is embedded in the 20-DIP (0.300, 7.62mm) package. A Tube package is used to package it. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~125°C is set as the operating temperature. In the 74HCT series, this FPGA is located. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. This type belongs to the 74HCT563 family. In order to function, the supply voltage should be set to 5V. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HCT. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. It reaches a maximum supply voltage (Vsup) of 5.5V. The system is powered by 5V sources. It is recommended to have a higher supply voltage (Vsup) than 4.5V. There is also BROADSIDE VERSION OF 533 characteristics to it.
74HCT563N,652 Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT563 family
20 pin count
5V power supplies
74HCT563N,652 Applications
There are a lot of NXP USA Inc. 74HCT563N,652 Latches applications.
- Counter control
- Relay replacement
- Digital bus buffer
- Automotive Infotainment
- Counter
- Lamp and Display (LED)
- Watches
- Ring counter
- Serial Output Register
- Shift left with parallel loading
