74HCT573D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 20mA |
| Number of Bits | 8 |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 17ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT573D,652 Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. The package is in the form of Tube. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~125°C is set as the operating temperature. This FPGA is part of the 74HCT series. There are 8 bits in this electronic part. A device with this design has 20 terminations. There is no doubt that it belongs to the family 74HCT573. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is part of the family of electronic devices called HCT. The device has 20 pins. This device has 2 ports that can be connected to it. 5.5V is the maximum supply voltage (Vsup). Ensure that the supply voltage (Vsup) is greater than 4.5V. Due to its 20mA output current, it offers maximum design flexibility. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.
74HCT573D,652 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
74HCT573D,652 Applications
There are a lot of Nexperia USA Inc. 74HCT573D,652 Latches applications.
- Counter
- A/D and D/A conversion
- Registers
- Double bus register system
- Frequency
- Parallel-to-Serial Data Conversion
- Shift right register
- Parallel Output
- Four-bit storage with output enable
- Automatic test equipment
