74HCT573DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 8μA |
| Output Current | 35A |
| Number of Bits | 8 |
| Propagation Delay | 53 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Max Supply Voltage (DC) | 5.5V |
| Min Supply Voltage (DC) | 4.5V |
| Ambient Temperature Range High | 125°C |
| Height | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT573DB,118 Overview
In the package 20-SSOP (0.209, 5.30mm Width), it can be found. A package of Tape & Reel (TR) has been used. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. There is -40°C~125°C operating temperature. It is a type of FPGA belonging to the 74HCT series. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74HCT573. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is part of the family of electronic devices called HCT. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. An electronic circuit can be found on 8 input lines. Due to its 35A output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Without external influences, it consumes 8μA of quiescent current. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.
74HCT573DB,118 Features
20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
74HCT573DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT573DB,118 Latches applications.
- Buffer/Storage Registers
- Serial Input
- Phase comparator
- Automatic test equipment
- Network Switches
- Hammer
- Up/down difference counting
- Buffer register
- Storage
- Bus system register with enable parallel lines at bus side
