74HCT573PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Voltage | 7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 35mA |
| Number of Bits | 8 |
| Max Voltage Rating (DC) | 5.5V |
| Propagation Delay | 53 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Max Supply Voltage (DC) | 5.5V |
| Min Supply Voltage (DC) | 4.5V |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT573PW,118 Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It operates at -40°C~125°C degrees Celsius. An FPGA in this series belongs to the 74HCT family. With this electronic part, there are 8 bits. A device with this design has 20 terminations. 74HCT573 is the family name of it. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. It is a member of the HCT family of electronic devices. The device has 20 pins. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. It contains 8 input lines where electronic circuits are present. With an output current of 35mA, it is highly flexible in terms of design. For maximum efficiency, the supply voltage should be set to 5V. It consumes 8μA current from its quiescent state without being affected by external factors at all. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.
74HCT573PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
74HCT573PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT573PW,118 Latches applications.
- Serial Output Register
- Automotive Body Electronics
- Meter applications
- Synchronous frequency dividers
- Up-Down Johnson
- Digital bus buffer
- Shift register
- Bus system register with enable parallel lines at bus side
- Display driver
- Buffer/Storage Registers
