74HCT574D-Q100,118
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Clock Frequency | 76MHz |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
74HCT574D-Q100,118 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74HCT series. You should not exceed 76MHzin the output frequency of the device. A total of 1 elements are present. During its operation, it consumes 8μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT574family includes it. A voltage of 5V is used as the power supply for this D latch. There is 3.5pF input capacitance for this T flip flop. It is a member of the HCTfamily of D flip flop. Surface Mount mounts this electronic component. This board has 20 pins. Its clock edge trigger type is Positive Edge. This D flip flop is equipped with 0 ports. The supply voltage should be maintained at 5V for high efficiency.
74HCT574D-Q100,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
74HCT574D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HCT574D-Q100,118 Flip Flops applications.
- Test & Measurement
- Set-reset capability
- Supports Live Insertion
- Single Down Count-Control Line
- Load Control
- Data Synchronizers
- Latch
- Storage Registers
- QML qualified product
- CMOS Process
